What certifications does the production line have?

The equipment holds CE, ISO9001, and SGS certifications and complies with EU ECODESIGN and Chinese GB/T standards.

What workpiece materials and sizes are supported?

It supports Carbon Steel and Stainless Steel tanks with diameters of 300-600mm and lengths of 400-1800mm, accommodating capacities from 5L to 600L.

Fully Automatic Enamel Coating Production Line for Kitchen Water Heaters

Name: Fully Automatic Enamel Coating Production Line for Kitchen Water Heaters
Brand: Dongguan Tims Automatic Equipment Co., Ltd.
SKU: 2253792125

Guangdong, ChinaDongguan Tims Automatic Equipment Co., Ltd.

US$5,000.00-2,000,000.00

1 Set

Product profile

Customization

Available

Application

Appliance Industry

Coating Type

Anti-corrosion Coating

Heating system

Diesel, electric, gas, LPG

Warranty

One-Year Warranty

Furnace Temperature

830-900℃ Optimal Range for Enamel Frit Melting

Temperature Control Accuracy

±2℃

High-Temperature Zone

≤±5℃ (at Any Point in The Furnace)

Degreasing Temperature

50-60℃ (Processing Time 15-20min)

Pickling Temperature

40-50℃ (for Rusty Workpieces)

Drying Temperature

80-120℃ (Drying Time 10-40min)

Power Supply

440/380V/50Hz, 220V/60Hz

Workpiece Materials

Carbon Steel/ Stainless Steel

Applicable Workpieces

Water Heater Tank

Physical Pre-Treatment

Shot Blasting/ Manual

Enamel Dry Film Thickness

150-500μm

Adhesion

≥5n/Cm

Salt Spray Resistance

≥500 Hours

Capacity

80-300 Pieces / Hour (50L Tank)

Energy Consumption Per Unit Product

≤8 Kw·H / Piece

Transport Package

Cartons/Waterproof Plastic Film/Wooden Pallets

Specification

custom

Trademark

TIMS

Origin

China

HS Code

8424899990

Production Capacity

76sets/ Year

Key features

Patented Flexible Production: Over 10 patents enabling mixed production of various water heater tank models and specifications.

High Efficiency & Capacity: Fully automated one-piece flow with max capacity up to 350 units per hour.

Energy Saving Technology: Patented waste heat recovery reduces energy consumption by 40% compared to traditional equipment.

Modular Expandability: Modules can be independently separated or combined for capacity expansion and process upgrades.

Intelligent Monitoring: PLC and touch screen interface for real-time data monitoring, fault detection, and remote maintenance.

Environmental Compliance: Meets EU EEA and Chinese GB standards with integrated waste gas and wastewater treatment systems.

Comprehensive Warranty: 1-year full system warranty with lifelong technical support and spare parts supply.

Company profile

Cooperated with Fortune 500Patents AwardedManagement Certification100% Finished Products Inspection

Dongguan Tims Automatic Equipment Co., Ltd.

Guangdong, China

CertifiedBusiness Type: Manufacturer/Factory & Trading Company CertifiedR&D Capacity: ODM Service Available & OEM Service Available CertifiedCustomization Options: Customization from Samples, Customization from Designs, etc. CertifiedExport Year: 12 Years CertifiedNearest Port: Shenzhen Port, Guangzhou PortAverage Response Time: ≤2.55h

AI-Powered supplier vetting

SummaryThe supplier is a professional manufacturer and service provider of high-end enamel equipment, intelligent enamel and coating production lines, spraying systems, high-temperature firing equipment, robotic automation, and other non-standard automation equipment. It provides 3D design, OEM, ODM, and multiple customization services, with raw-material traceability, 100% finished-product inspection, ISO9001:2015 certification, and documented corrective-action and complaint-handling procedures. Manufacturing capacity is supported by valid contracts with associated subcontractors and in-stock capability. However, the supplier reports no new products in the past year, has one R&D engineer and no SDK, and lacks overseas agents, branches, warehouses, showrooms, and offline trade-show participation. Financial credibility cannot be positively established because the provided financial records report zero values, while no supporting explanation is given. Customer-case evidence is limited: it reports OEM service for...

Supplier typeThe supplier describes itself as a professional company engaged in R&D, manufacturing, sales, and service for high-end enamel equipment, intelligent enamel and coating production lines, spraying and firing equipment, robotic automation, and other non-standard automation equipment. This supports classification as an industrial equipment manufacturer and integrated engineering/service supplier.

CertificationsThe supplier holds an ISO9001:2015 management-system certificate. This is explicit evidence of a recognized quality-management certification, although no additional certifications are provided.

After-Sales capabilityThe supplier has documented corrective and preventive action and customer-complaint procedures with records, and offers service quotation terms including FOB, CIF, CFR, and EXW. However, it reports no overseas agents or branches, no overseas warehouse or showroom, and overseas service coverage of zero countries, so international onsite support appears limited.

R&D capabilityThe supplier provides R&D-related 3D software design, ODM, OEM, and customization services. Conversely, it reports no new products in the past year, has one R&D engineer, and has no available SDK, indicating limited evidence of recent product innovation and software-platform capability.

Production capacityThe supplier operates in industrial equipment manufacturing, reports valid manufacturing-capacity contracts with each associated subcontractor, maintains in-stock capability, and performs 100% finished-product inspection. Raw-material traceability is also available, supporting evidence of controlled production capability.

Customization capabilityThe supplier explicitly offers customization from samples, customization from designs, full customization, minor customization, and flexible customization, together with 3D software design, ODM, and OEM services. The breadth of stated options supports strong customization capability.

Product Q&A

Q:What is the production lead time for the equipment?

The standard production cycle is 30-70 days. For special configurations, a detailed timeline will be provided after confirming the technical plan.

Q:What information is needed to get a quote?

Please provide workpiece type, dimensions, weight range, expected daily output, coating process requirements, curing conditions, and available factory space dimensions.

Q:How is the equipment installed and how long does it take?

Professional engineers provide turnkey installation and commissioning. Duration is generally 30-60 days depending on complexity. The buyer bears travel, accommodation, and meal costs.

Q:What after-sales services are provided?

Services include free wearing parts, online training, remote debugging within 2 hours, and on-site support for major failures within 5-10 working days.

Q:What is the warranty period for the equipment?

All equipment comes with a 12-month warranty from the date of successful commissioning, covering free repair or replacement of faulty components.