Can the production line handle different water heater tank sizes?

Yes, it is compatible with cylindrical tank dimensions of diameter 300-600mm and length 400-1800mm, accommodating capacities from 5L to 600L. Larger specifications can be customized as needed.

What power supply options are available for the equipment?

The equipment supports 440/380V/50Hz, 220V/60Hz power supplies, and these specifications are customizable to meet your specific factory requirements.

High-Capacity Enameling Machine for Cast Iron Tableware with Automation

Name: High-Capacity Enameling Machine for Cast Iron Tableware with Automation
Brand: Dongguan Tims Automatic Equipment Co., Ltd.
SKU: 2253154805

Guangdong, ChinaDongguan Tims Automatic Equipment Co., Ltd.

US$5,000.00-2,000,000.00

1 Set

Product profile

Customization

Available

Application

Appliance Industry

Coating Type

Anti-corrosion Coating

Heating system

Diesel, electric, gas, LPG

Warranty

One-Year Warranty

Furnace Temperature

830-900℃ Optimal Range for Enamel Frit Melting

Temperature Control Accuracy

±2℃

High-Temperature Zone

≤±5℃ (at Any Point in The Furnace)

Degreasing Temperature

50-60℃ (Processing Time 15-20min)

Pickling Temperature

40-50℃ (for Rusty Workpieces)

Drying Temperature

80-120℃ (Drying Time 10-40min)

Power Supply

440/380V/50Hz, 220V/60Hz

Workpiece Materials

Carbon Steel/ Stainless Steel

Applicable Workpieces

Water Heater Tank

Physical Pre-Treatment

Shot Blasting/ Manual

Enamel Dry Film Thickness

150-500μm

Adhesion

≥5n/Cm

Salt Spray Resistance

≥500 Hours

Capacity

80-300 Pieces / Hour (50L Tank)

Energy Consumption Per Unit Product

≤8 Kw·H / Piece

Transport Package

Cartons/Waterproof Plastic Film/Wooden Pallets

Specification

custom

Trademark

TIMS

Origin

China

HS Code

8424899990

Production Capacity

76sets/ Year

Key features

Flexible Mixed Production: Supports multiple water heater models and specifications with automated changeover capabilities.

High Production Capacity: Achieves up to 350 units per hour with fully automated one-piece flow production.

Advanced Energy Saving: Patented waste heat recovery systems reduce energy consumption by 40% compared to traditional equipment.

Comprehensive Certifications: Meets CE, ISO9001, SGS, EU ECODESIGN, and Chinese GB/T standards.

Patented Technology: Features over ten patents including automatic spray pickling and robot concentric gripper systems.

Low Failure Rate: Robust design with imported European core components and self-diagnostic capabilities.

Environmental Compliance: Integrated waste gas and water treatment systems meeting strict global emission standards.

Company profile

Cooperated with Fortune 500Patents AwardedManagement Certification100% Finished Products Inspection

Dongguan Tims Automatic Equipment Co., Ltd.

Guangdong, China

CertifiedBusiness Type: Manufacturer/Factory & Trading Company CertifiedR&D Capacity: ODM Service Available & OEM Service Available CertifiedCustomization Options: Customization from Samples, Customization from Designs, etc. CertifiedExport Year: 12 Years CertifiedNearest Port: Shenzhen Port, Guangzhou PortAverage Response Time: ≤2.25h

AI-Powered supplier vetting

SummaryThe supplier is a professional manufacturer and service provider of high-end enamel equipment, intelligent enamel and coating production lines, spraying systems, high-temperature firing equipment, robotic automation, and other non-standard automation equipment. It provides 3D design, OEM, ODM, and multiple customization services, with raw-material traceability, 100% finished-product inspection, ISO9001:2015 certification, and documented corrective-action and complaint-handling procedures. Manufacturing capacity is supported by valid contracts with associated subcontractors and in-stock capability. However, the supplier reports no new products in the past year, has one R&D engineer and no SDK, and lacks overseas agents, branches, warehouses, showrooms, and offline trade-show participation. Financial credibility cannot be positively established because the provided financial records report zero values, while no supporting explanation is given. Customer-case evidence is limited: it reports OEM service for...

Supplier typeThe supplier describes itself as a professional company engaged in R&D, manufacturing, sales, and service for high-end enamel equipment, intelligent enamel and coating production lines, spraying and firing equipment, robotic automation, and other non-standard automation equipment. This supports classification as an industrial equipment manufacturer and integrated engineering/service supplier.

CertificationsThe supplier holds an ISO9001:2015 management-system certificate. This is explicit evidence of a recognized quality-management certification, although no additional certifications are provided.

After-Sales capabilityThe supplier has documented corrective and preventive action and customer-complaint procedures with records, and offers service quotation terms including FOB, CIF, CFR, and EXW. However, it reports no overseas agents or branches, no overseas warehouse or showroom, and overseas service coverage of zero countries, so international onsite support appears limited.

R&D capabilityThe supplier provides R&D-related 3D software design, ODM, OEM, and customization services. Conversely, it reports no new products in the past year, has one R&D engineer, and has no available SDK, indicating limited evidence of recent product innovation and software-platform capability.

Production capacityThe supplier operates in industrial equipment manufacturing, reports valid manufacturing-capacity contracts with each associated subcontractor, maintains in-stock capability, and performs 100% finished-product inspection. Raw-material traceability is also available, supporting evidence of controlled production capability.

Customization capabilityThe supplier explicitly offers customization from samples, customization from designs, full customization, minor customization, and flexible customization, together with 3D software design, ODM, and OEM services. The breadth of stated options supports strong customization capability.

Product Q&A

Q:How long does it take to produce the equipment we ordered?

The production lead time depends on your specific customization requirements. For a complete coating line, the standard production cycle is 30-70 days. If your order involves special configurations, we will provide a detailed timeline after confirming the technical plan with you.

Q:If I want to discuss product procurement with you, what information do I need to provide?

Please share: 1) Type of workpieces; 2) Maximum and regular dimensions; 3) Weight range; 4) Expected daily output; 5) Coating process requirements; 6) Curing conditions; 7) Available factory space dimensions.

Q:How will you install the equipment we ordered? And how long will the installation take?

We provide turnkey installation and commissioning services with professional engineers. Installation duration is generally 30-60 days depending on project complexity. The buyer bears travel, accommodation, and meal costs for engineers.

Q:What after-sales services do you provide?

We offer spare parts supply (free wearing parts included, 3-7 days delivery for others), maintenance guidance with manuals and training, remote debugging within 2 hours, and on-site support within 5-10 working days for major failures.

Q:What is the warranty period for the equipment?

All equipment comes with a 12-month warranty from the date of successful commissioning. During this period, we repair or replace faulty components free of charge, excluding human damage.