What workpiece materials and sizes are supported?

It supports Carbon Steel and Stainless Steel. Compatible with cylindrical tanks of diameter 300-600mm and length 400-1800mm, accommodating 5L to 600L capacities.

Is customization available for the production line?

Yes, the line supports full customization, minor customization, and flexible customization from samples or designs to meet specific production needs.

What certifications does the equipment hold?

The equipment holds CE, ISO9001, and SGS certifications, and complies with EU ECODESIGN environmental standards and Chinese GB/T standards.

Kitchen Water Heater Enamel Production Equipment

Name: Kitchen Water Heater Enamel Production Equipment
Brand: Dongguan Tims Automatic Equipment Co., Ltd.
SKU: 2242117035

Guangdong, ChinaDongguan Tims Automatic Equipment Co., Ltd.

US$5,000.00-2,000,000.00

1 Set

Product profile

Customization

Available

Application

Appliance Industry

Coating Type

Anti-corrosion Coating

Heating system

Diesel, electric, gas, LPG

Warranty

One-Year Warranty

Furnace Temperature

830-900℃ Optimal Range for Enamel Frit Melting

Temperature Control Accuracy

±2℃

High-Temperature Zone

≤±5℃ (at Any Point in The Furnace)

Degreasing Temperature

50-60℃ (Processing Time 15-20min)

Pickling Temperature

40-50℃ (for Rusty Workpieces)

Drying Temperature

80-120℃ (Drying Time 10-40min)

Power Supply

440/380V/50Hz, 220V/60Hz

Workpiece Materials

Carbon Steel/ Stainless Steel

Applicable Workpieces

Water Heater Tank

Physical Pre-Treatment

Shot Blasting/ Manual

Enamel Dry Film Thickness

150-500μm

Adhesion

≥5n/Cm

Salt Spray Resistance

≥500 Hours

Capacity

80-300 Pieces / Hour (50L Tank)

Energy Consumption Per Unit Product

≤8 Kw·H / Piece

Transport Package

Cartons/Waterproof Plastic Film/Wooden Pallets

Specification

custom

Trademark

TIMS

Origin

China

HS Code

8424899990

Production Capacity

76sets/ Year

Key features

Patented Flexible Production: Over ten patents enable mixed production of various water heater tank models and specifications.

High Efficiency & Capacity: Fully automated one-piece flow achieves up to 350 units per hour with 24-hour continuous operation.

Energy Saving Technology: Patented waste heat recovery reduces energy consumption by 40% compared to traditional equipment.

Modular Expandability: Modules can be independently separated or combined to support capacity expansion and process upgrades.

Intelligent Monitoring: PLC and touch screen display real-time data with automatic alarms for abnormal situations.

CE & ISO Certified: Complies with EU ECODESIGN, ISO9001, and SGS standards for global export requirements.

Low Failure Rate: Premium imported core components and robust self-diagnostic capabilities ensure system stability.

Company profile

Cooperated with Fortune 500Patents AwardedManagement Certification100% Finished Products Inspection

Dongguan Tims Automatic Equipment Co., Ltd.

Guangdong, China

CertifiedBusiness Type: Manufacturer/Factory & Trading Company CertifiedR&D Capacity: ODM Service Available & OEM Service Available CertifiedCustomization Options: Customization from Samples, Customization from Designs, etc. CertifiedExport Year: 12 Years CertifiedNearest Port: Shenzhen Port, Guangzhou PortAverage Response Time: ≤3.33h

AI-Powered supplier vetting

SummaryThe supplier is a professional manufacturer and service provider of high-end enamel equipment, intelligent enamel and coating production lines, spraying systems, high-temperature firing equipment, robotic automation, and other non-standard automation equipment. It provides 3D design, OEM, ODM, and multiple customization services, with raw-material traceability, 100% finished-product inspection, ISO9001:2015 certification, and documented corrective-action and complaint-handling procedures. Manufacturing capacity is supported by valid contracts with associated subcontractors and in-stock capability. However, the supplier reports no new products in the past year, has one R&D engineer and no SDK, and lacks overseas agents, branches, warehouses, showrooms, and offline trade-show participation. Financial credibility cannot be positively established because the provided financial records report zero values, while no supporting explanation is given. Customer-case evidence is limited: it reports OEM service for...

Supplier typeThe supplier describes itself as a professional company engaged in R&D, manufacturing, sales, and service for high-end enamel equipment, intelligent enamel and coating production lines, spraying and firing equipment, robotic automation, and other non-standard automation equipment. This supports classification as an industrial equipment manufacturer and integrated engineering/service supplier.

CertificationsThe supplier holds an ISO9001:2015 management-system certificate. This is explicit evidence of a recognized quality-management certification, although no additional certifications are provided.

After-Sales capabilityThe supplier has documented corrective and preventive action and customer-complaint procedures with records, and offers service quotation terms including FOB, CIF, CFR, and EXW. However, it reports no overseas agents or branches, no overseas warehouse or showroom, and overseas service coverage of zero countries, so international onsite support appears limited.

R&D capabilityThe supplier provides R&D-related 3D software design, ODM, OEM, and customization services. Conversely, it reports no new products in the past year, has one R&D engineer, and has no available SDK, indicating limited evidence of recent product innovation and software-platform capability.

Production capacityThe supplier operates in industrial equipment manufacturing, reports valid manufacturing-capacity contracts with each associated subcontractor, maintains in-stock capability, and performs 100% finished-product inspection. Raw-material traceability is also available, supporting evidence of controlled production capability.

Customization capabilityThe supplier explicitly offers customization from samples, customization from designs, full customization, minor customization, and flexible customization, together with 3D software design, ODM, and OEM services. The breadth of stated options supports strong customization capability.

Product Q&A

Q:What is the production lead time for the equipment?

The standard production cycle for a complete coating line is 30-70 days. Special configurations may require a detailed timeline after technical plan confirmation.

Q:What information is needed to get a quote?

Please provide workpiece type, dimensions, weight range, expected daily output, coating process requirements, curing conditions, and available factory space dimensions.

Q:How is the equipment installed and how long does it take?

Professional engineers provide turnkey installation and commissioning. Duration is typically 30-60 days depending on complexity. The buyer covers travel, accommodation, and meals.

Q:What after-sales services and warranty are provided?

We offer a 12-month warranty, free wearing parts, online training, remote debugging within 2 hours, and on-site support for major failures within 5-10 working days.

Q:What is the production capacity of the line?

The capacity is 80-300 pieces per hour for a standard 50L tank, with a maximum capacity of up to 350 units per hour using fully automated one-piece flow.