Tims Advanced Water Heater Enamel Coating Equipment with Precision Control

Name: Tims Advanced Water Heater Enamel Coating Equipment with Precision Control
Brand: Dongguan Tims Automatic Equipment Co., Ltd.
SKU: 2281092535

Guangdong, ChinaDongguan Tims Automatic Equipment Co., Ltd.

US$5,000.00-2,000,000.00

1 Set

Product profile

Customization

Available

Application

Appliance Industry

Coating Type

Anti-corrosion Coating

Model NO.

Heating system

Diesel, electric, gas, LPG

Warranty

One-Year Warranty

Furnace Temperature

830-900℃ Optimal Range for Enamel Frit Melting

Temperature Control Accuracy

±2℃

High-Temperature Zone

≤±5℃ (at Any Point in The Furnace)

Degreasing Temperature

50-60℃ (Processing Time 15-20min)

Pickling Temperature

40-50℃ (for Rusty Workpieces)

Drying Temperature

80-120℃ (Drying Time 10-40min)

Power Supply

440/380V/50Hz, 220V/60Hz

Workpiece Materials

Carbon Steel/ Stainless Steel

Applicable Workpieces

Water Heater Tank

Physical Pre-Treatment

Shot Blasting/ Manual

Enamel Dry Film Thickness

150-500μm

Adhesion

≥5n/Cm

Salt Spray Resistance

≥500 Hours

Capacity

80-300 Pieces / Hour (50L Tank)

Energy Consumption Per Unit Product

≤8 Kw·H / Piece

Transport Package

Cartons/Waterproof Plastic Film/Wooden Pallets

Specification

custom

Trademark

TIMS

Origin

China

HS Code

8424899990

Production Capacity

76sets/ Year

Key features

Patented Flexible Production: Industry-first flexible production with over ten patents for multiple heater models.

High Capacity Efficiency: Achieves up to 350 units per hour with fully automated one-piece flow production.

Dual Patent Energy Saving: 40% reduction in energy consumption via waste heat recovery and high-temp insulation.

Intelligent Monitoring System: Real-time PLC monitoring of temperature, pressure, and production data with alarms.

Modular Expandability: Supports capacity expansion and process upgrades without replacing the entire line.

Full Automation Stability: Robotic loading, production, and unloading for minimal personnel and low failure rate.

Global Compliance: Meets EU ECODESIGN and Chinese GB standards with CE, ISO9001, and SGS certifications.

Company profile

Cooperated with Fortune 500Patents AwardedManagement Certification100% Finished Products Inspection

Dongguan Tims Automatic Equipment Co., Ltd.

Guangdong, China

CertifiedBusiness Type: Manufacturer/Factory & Trading Company CertifiedR&D Capacity: ODM Service Available & OEM Service Available CertifiedCustomization Options: Customization from Samples, Customization from Designs, etc. CertifiedExport Year: 12 Years CertifiedNearest Port: Shenzhen Port, Guangzhou PortAverage Response Time: ≤2.55h

AI-Powered supplier vetting

SummaryThe supplier is a professional manufacturer and service provider of high-end enamel equipment, intelligent enamel and coating production lines, spraying systems, high-temperature firing equipment, robotic automation, and other non-standard automation equipment. It provides 3D design, OEM, ODM, and multiple customization services, with raw-material traceability, 100% finished-product inspection, ISO9001:2015 certification, and documented corrective-action and complaint-handling procedures. Manufacturing capacity is supported by valid contracts with associated subcontractors and in-stock capability. However, the supplier reports no new products in the past year, has one R&D engineer and no SDK, and lacks overseas agents, branches, warehouses, showrooms, and offline trade-show participation. Financial credibility cannot be positively established because the provided financial records report zero values, while no supporting explanation is given. Customer-case evidence is limited: it reports OEM service for...

Supplier typeThe supplier describes itself as a professional company engaged in R&D, manufacturing, sales, and service for high-end enamel equipment, intelligent enamel and coating production lines, spraying and firing equipment, robotic automation, and other non-standard automation equipment. This supports classification as an industrial equipment manufacturer and integrated engineering/service supplier.

CertificationsThe supplier holds an ISO9001:2015 management-system certificate. This is explicit evidence of a recognized quality-management certification, although no additional certifications are provided.

After-Sales capabilityThe supplier has documented corrective and preventive action and customer-complaint procedures with records, and offers service quotation terms including FOB, CIF, CFR, and EXW. However, it reports no overseas agents or branches, no overseas warehouse or showroom, and overseas service coverage of zero countries, so international onsite support appears limited.

R&D capabilityThe supplier provides R&D-related 3D software design, ODM, OEM, and customization services. Conversely, it reports no new products in the past year, has one R&D engineer, and has no available SDK, indicating limited evidence of recent product innovation and software-platform capability.

Production capacityThe supplier operates in industrial equipment manufacturing, reports valid manufacturing-capacity contracts with each associated subcontractor, maintains in-stock capability, and performs 100% finished-product inspection. Raw-material traceability is also available, supporting evidence of controlled production capability.

Customization capabilityThe supplier explicitly offers customization from samples, customization from designs, full customization, minor customization, and flexible customization, together with 3D software design, ODM, and OEM services. The breadth of stated options supports strong customization capability.

Product Q&A

Q:How long does it take to produce the equipment we ordered?

The production lead time depends on customization. For a complete coating line, the standard cycle is 30-70 days. Special configurations require a detailed timeline after technical plan confirmation.

Q:How will you install the equipment we ordered? And how long will the installation take?

We provide turnkey installation by engineers. Duration is generally 30-60 days depending on complexity. Buyers bear travel, accommodation, and meal costs for engineers.

Q:What after-sales services do you provide?

Services include free wearing parts, spare parts delivery within 3-7 days, maintenance manuals, online training, remote debugging within 2 hours, and on-site support within 5-10 days for major failures.

Q:What is the warranty period for the equipment?

All equipment comes with a 12-month warranty from the date of successful commissioning, covering free repair or replacement of faulty components (excluding human damage).

Q:Can the production line be customized for different tank sizes?

Yes, the line accommodates cylindrical tanks with diameters of 300-600mm and lengths of 400-1800mm, supporting capacities from 5L to 600L, with larger specifications available upon customization.