Can the production line be customized for different water heater specifications?

Yes, the line supports cylindrical tanks from 300-600mm diameter and 400-1800mm length, accommodating capacities from 5L to 600L, with larger specifications available upon customization.

What certifications does the equipment meet?

The equipment meets CE, ISO9001, and SGS certifications, and complies with EU ECODESIGN and Chinese GB/T 29519-2013 standards.

Does the equipment support both carbon steel and stainless steel workpieces?

Yes, the production line is compatible with both carbon steel (mainstream) and stainless steel (high-end) workpiece materials.

Tims Patented Enclosed Slurry Circulation Enamel Production Equipment

Name: Tims Patented Enclosed Slurry Circulation Enamel Production Equipment
Brand: Dongguan Tims Automatic Equipment Co., Ltd.
SKU: 2287000085

Guangdong, ChinaDongguan Tims Automatic Equipment Co., Ltd.

US$5,000.00-2,000,000.00

1 Set

Product profile

Customization

Available

Application

Appliance Industry

Coating Type

Anti-corrosion Coating

Heating system

Diesel, electric, gas, LPG

Warranty

One-Year Warranty

Furnace Temperature

830-900℃ Optimal Range for Enamel Frit Melting

Temperature Control Accuracy

±2℃

High-Temperature Zone

≤±5℃ (at Any Point in The Furnace)

Degreasing Temperature

50-60℃ (Processing Time 15-20min)

Pickling Temperature

40-50℃ (for Rusty Workpieces)

Drying Temperature

80-120℃ (Drying Time 10-40min)

Power Supply

440/380V/50Hz, 220V/60Hz

Workpiece Materials

Carbon Steel/ Stainless Steel

Applicable Workpieces

Water Heater Tank

Physical Pre-Treatment

Shot Blasting/ Manual

Enamel Dry Film Thickness

150-500μm

Adhesion

≥5n/Cm

Salt Spray Resistance

≥500 Hours

Capacity

80-300 Pieces / Hour (50L Tank)

Energy Consumption Per Unit Product

≤8 Kw·H / Piece

Transport Package

Cartons/Waterproof Plastic Film/Wooden Pallets

Specification

custom

Trademark

TIMS

Origin

China

HS Code

8424899990

Production Capacity

76sets/ Year

Key features

Patented Flexible Production: Industry-first patented tech supports multiple water heater models and specs with automated spray pickling and enameling.

High Capacity Efficiency: Fully automated one-piece flow boosts production up to 350 units per hour with 24-hour operation support.

Dual Patent Energy Saving: Waste heat recovery and high-temp insulation reduce energy consumption by 40% compared to traditional equipment.

Enclosed Slurry Circulation: Patent close-loop rapid slurry return ensures uniform coating, reduces defects, and conserves enamel material.

Modular Expandability: Functional modules can be independently added or upgraded without replacing the entire production line.

Intelligent Monitoring System: PLC and touch screen enable real-time data monitoring, self-diagnosis, and remote maintenance capabilities.

Comprehensive Certifications: Meets CE, ISO9001, SGS, EU ECODESIGN, and Chinese GB/T 29519-2013 standards for global export compliance.

Company profile

Cooperated with Fortune 500Patents AwardedManagement Certification100% Finished Products Inspection

Dongguan Tims Automatic Equipment Co., Ltd.

Guangdong, China

CertifiedBusiness Type: Manufacturer/Factory & Trading Company CertifiedR&D Capacity: ODM Service Available & OEM Service Available CertifiedCustomization Options: Customization from Samples, Customization from Designs, etc. CertifiedExport Year: 12 Years CertifiedNearest Port: Shenzhen Port, Guangzhou PortAverage Response Time: ≤15h

AI-Powered supplier vetting

SummaryThe supplier is a professional manufacturer and service provider of high-end enamel equipment, intelligent enamel and coating production lines, spraying systems, high-temperature firing equipment, robotic automation, and other non-standard automation equipment. It provides 3D design, OEM, ODM, and multiple customization services, with raw-material traceability, 100% finished-product inspection, ISO9001:2015 certification, and documented corrective-action and complaint-handling procedures. Manufacturing capacity is supported by valid contracts with associated subcontractors and in-stock capability. However, the supplier reports no new products in the past year, has one R&D engineer and no SDK, and lacks overseas agents, branches, warehouses, showrooms, and offline trade-show participation. Financial credibility cannot be positively established because the provided financial records report zero values, while no supporting explanation is given. Customer-case evidence is limited: it reports OEM service for...

Supplier typeThe supplier describes itself as a professional company engaged in R&D, manufacturing, sales, and service for high-end enamel equipment, intelligent enamel and coating production lines, spraying and firing equipment, robotic automation, and other non-standard automation equipment. This supports classification as an industrial equipment manufacturer and integrated engineering/service supplier.

CertificationsThe supplier holds an ISO9001:2015 management-system certificate. This is explicit evidence of a recognized quality-management certification, although no additional certifications are provided.

After-Sales capabilityThe supplier has documented corrective and preventive action and customer-complaint procedures with records, and offers service quotation terms including FOB, CIF, CFR, and EXW. However, it reports no overseas agents or branches, no overseas warehouse or showroom, and overseas service coverage of zero countries, so international onsite support appears limited.

R&D capabilityThe supplier provides R&D-related 3D software design, ODM, OEM, and customization services. Conversely, it reports no new products in the past year, has one R&D engineer, and has no available SDK, indicating limited evidence of recent product innovation and software-platform capability.

Production capacityThe supplier operates in industrial equipment manufacturing, reports valid manufacturing-capacity contracts with each associated subcontractor, maintains in-stock capability, and performs 100% finished-product inspection. Raw-material traceability is also available, supporting evidence of controlled production capability.

Customization capabilityThe supplier explicitly offers customization from samples, customization from designs, full customization, minor customization, and flexible customization, together with 3D software design, ODM, and OEM services. The breadth of stated options supports strong customization capability.

Product Q&A

Q:How long does it take to produce the equipment we ordered?

The production lead time depends on customization. For a complete coating line, the standard cycle is 30-70 days. Special configurations require a detailed timeline after confirming the technical plan.

Q:If I want to discuss product procurement with you, what information do I need to provide?

Please provide: 1) Workpiece type, 2) Max/regular dimensions, 3) Weight range, 4) Expected daily output, 5) Coating process requirements, 6) Curing conditions, and 7) Available factory space dimensions.

Q:How will you install the equipment we ordered? And how long will the installation take?

We provide turnkey installation by engineers. Duration is generally 30-60 days depending on complexity. The buyer bears travel, accommodation, and meal costs for engineers.

Q:What after-sales services do you provide?

Services include: 1) Free wearing parts set and 3-7 day spare parts delivery, 2) Maintenance manual and online training, 3) Remote debugging within 2 hours or on-site support within 5-10 days, 4) 12-month warranty covering free repair/replacement of non-human damage.

Q:What is the warranty period for the equipment?

All equipment comes with a 12-month warranty from the date of successful commissioning, covering free repair or replacement of faulty components excluding human damage.