Powered by Made-in-China.com
Over-Temp Protected Tdd Power Amplifier for Marco Base Station
US$123.00
1 Piece
Product specifications
Type
Product profile
Certification
CECondition
NewUsage
Telephone, Workstation, Mobile PhoneModel NO.
TDD-4.5~5.0G-50W-150100-48VGaNSupport Network
GSMInformation Content
DataProduct Name
Tdd-4.5~5.0g-50W-150100-48vganKeywords
Gallium Nitride Power AmplifierMechanical Dimensions
150 × 100 × 23 mmEvm
≤5% (Peak-to-Average Power Ratio 10db)Working Temperature
-40~+55℃Noise Figure
≤ 4.5 DbOperating Current
≤3.5AOperating Voltage
48Vin Band Ripplle
≤ 2.5 DbTransport Package
Standard Packaging or CustomizedSpecification
Standard Specifications or CustomizedTrademark
UZIWAVEOrigin
Fujian, ChinaProduction Capacity
50000pieces/YearKey features
GaN Technology: High reliability and stability with superior efficiency and thermal performance.
RS485 Monitoring: Real-time monitoring of temperature, VSWR, and forward power via RS485.
5G Standard Software: Equipped with 5G standard PA software for ad hoc network applications.
Company profile
Business Type: Manufacturer/FactoryAverage Response Time: ≤15h
About Our Factory & Business Background
AddressXiamen, Fujian, China
Our Production Capability & Technical Expertise
Main ProductsPower Amplifier, Mesh Network, Anti-Drone Module, Repeater, Electronic Fence
Product Q&A
Q:What should I check if the output power is lower than expected?
A:
Check input signal strength, verify ALC software settings, inspect rear-end components for excessive loss, and test the amplifier independently to rule out hardware faults.
Q:What causes low gain and how to solve it?
A:
Check if ATT attenuation is enabled in software, calibrate test system components to ensure qualified loss, and test the amplifier independently to identify hardware faults.
Q:How to locate high VSWR issues?
A:
Replace rear-end components one by one if detected by software, calibrate the test system if detected by instruments, and check for hardware faults if issues persist.
Q:What connectors are used for this amplifier?
A:
It features 3 connectors: PA IN uses an MCX connector, while others use SMA connectors.
Q:What is the frequency range of this TDD amplifier?
A:
The frequency range is 4500 MHz to 5000 MHz for both uplink and downlink.
Send Inquiry
*To:
Xiamen Yaozhi Huasheng Communication Technology Co., Ltd.
Xiamen Yaozhi Huasheng Communication Technology Co., Ltd.*Content:
Supplier replies will be sent to your registered email
You may also like
VHF UHF Tetra Linear Dpd High Acpr Tdd FDD Power Amplifier for Base Station SDR
Negotiable
1 Piece(MOQ)
47dBm Acpr 45dbc Linear Tdd RF Power Amplifier for SDR & Micro Bts
US$950.00
1 Piece(MOQ)
1565-1595MHz GPS L1 RF Power Amplifier for Uav Drone/Jammer/Repeater/Base Station
Negotiable
1 Piece(MOQ)
23dBm 850MHz 2100MHz 3G Booster Power Amplifier for Basement (GW-23CW)
US$149.80-171.20
1 Piece(MOQ)
53dBm WCDMA Ldmos High Efficiecny RF Power Amplifier for Laboratory Testing Instruments
US$1,000.00
1 Piece(MOQ)
47dBm GaAs 5.1-5.3GHz 12V Broadband WiFi C Band Power Amplifier
US$1,500.00
1 Piece(MOQ)
23dBm CDMA800MHz/GSM 850MHz CDMA Signal Amplifier Cell Phone Amplifier for Home (GW-23C-H)
US$70.20-80.50
1 Piece(MOQ)
50W Amplifier 5.4G Power Amplifier
US$1,500.00
1 Piece(MOQ)
40dBm Dcs1800 3G 4G Antenna Booster Power Amplifier (GW-40D)
US$1,500.00-1,725.00
1 Piece(MOQ)
GSM900-35m-37dB Dual Band Direct Coupling Fiber Optical Master Unit Power Amplifier
US$680.00-700.00
9 Pieces(MOQ)
VHF 150-40 dBm Bda Solution Line Amplifier for 2 Way Radio System and Ibs
US$1,000.00-1,500.00
10 Pieces(MOQ)
Uziwave Tdd 12V-Tx Series Power Amplifier (2.8-3.4GHz) for Marco Base Station
US$123.00
1 Piece(MOQ)
5g 10W Radio Frequency Amplifier for Indoor Cell Phone Distribution Line Amplifier
US$1,200.00-1,500.00
9 Pieces(MOQ)
Uziwave N78 Tdd 5W Power Amplifier for Marco Base Station
US$123.00
1 Piece(MOQ)
