Ts3060 Large Capacity Dewatering Vibrating Screen for Crushing Plant Systems

There are 3 common causes: insufficient vibration frequency, too thick material layer on the screen surface, or damaged polyurethane screen plates. Solutions: Check if the two vibration motors run synchronously, control uniform feeding volume to avoid material accumulation, and replace blocked or worn screen panels in time.

Absolutely. It is the matching core equipment of hydrocyclone system. The cyclone sends concentrated sand slurry to the dewatering screen for solid-liquid separation, recovering lost fine sand while lowering sand moisture, which greatly improves finished sand yield and quality.

Under normal sand washing working conditions, the PU screen plate can serve 12 TO 24 months, 3 TO 5 times longer than manganese steel woven mesh. If you process coarse hard stones, we can provide thickened wear-resistant PU plates to extend service life further.

The ground must be flat, solid concrete ground with enough bearing capacity. Do not rigidly weld the support legs to the foundation; just fix them with anchor bolts. Keep all shock-absorbing springs vertically balanced to prevent screen deflection during operation.

First shut down the machine for inspection. Main faults include inconsistent spring elasticity on both sides, loose screen box bolts, or one vibration motor failing to work normally. Replace aging springs, fasten all bolts tightly, and overhaul the faulty vibrator to restore stable operation.