Industrial Wood CNC Machine with Auto Labeling and Loading Option for Automation

Yes, especially when making high-end customized furniture. Pre-milling can correct the cutting burrs of the cutting machine, making the edge banding fit more closely. Double trimming can trim the excess edge banding on both upper and lower sides of the board at the same time, avoiding manual secondary polishing and improving the appearance of finished products.

The core differences lie in processing efficiency and function coverage. Double-axis side hole drilling machine can only drill vertical holes and simple slots, suitable for single-category and small-batch production. Four-axis side hole drilling machine can drill vertical holes, horizontal holes, and Domino slots, supports multiple processes, suitable for complex customized furniture, and can reduce the number of equipment.

No need to configure an additional system; the equipment comes with a dedicated operating system (such as Homag, Syntec systems), and most support 'user-friendly' operation. Beginners can basically master basic operations through 1-3 days of on-site training provided by the manufacturer; proficiency in complex processes (such as special-shaped cutting) takes 1-2 weeks.

The power of cutting machines/side hole drilling machines is about 3-5KW, and edge banding machines (with heating) are about 8-12KW. Each piece of equipment requires 220V or 380V voltage (depending on the model). It is recommended to pull dedicated wires separately, especially for edge banding machines and cutting machines, to avoid equipment failures or reduced processing accuracy due to unstable voltage.

Not troublesome; daily maintenance can be done in 3 steps. Before getting off work every day: Clean the wood chips and dust on the equipment table to avoid accumulation and jamming. Every week: Add special lubricating oil to the guide rails and lead screws to prevent rust and wear. Every month: Check circuit connectors and pneumatic components to ensure no looseness or air leakage.