1100 Series Food Grade Flush Grid Modular Plastic Conveyor Belt

The ZE1102 belt is available in POM (with PP or PE pins), PP, and PE. POM offers the highest working load (25,000 N/m at 21degree centigrade) and excellent abrasion resistance ideal for heavy-duty applications. PP provides good chemical resistance for food processing. PE is the most flexible and impact-resistant, suitable for low-temperature environments down to -73degree centigrade. Choose based on your load requirements, operating temperature, and chemical exposure.

Standard width is calculated as W = 152.4+25.4*n (where n is an integer). The belt is assembled from single-piece widths of 50.8mm (edge) and 152.4mm (center), with combined assembly options including 101.6mm and 152.4mm edges. Note that actual belt width may be 0.1% to 0.3% smaller due to material shrinkage contact us before customizing.

Yes. The flush grid design with 28% open area facilitates thorough cleaning and drainage, minimizing contamination risks. The smooth grid surface and small pitch (15.24mm) reduce vibration and improve product handling. Materials like PP and PE are FDA-compliant for direct food contact. The belt is widely used in beverage, packaging, and food industry lines.

Very easy. One of the greatest advantages of plastic modular belts is that repairs are fast and require no expensive tools. Simply remove the damaged modules and snap in replacements no need to dismantle the entire conveyor or replace the whole belt. This significantly reduces downtime and maintenance costs.

With proper maintenance, modular plastic belts typically last 5 to 7 years in standard industrial applications. The belt itself requires no lubrication: just routine checks on belt tension and sprocket alignment. For cleaning, use detergents compatible with the plastic material and ensure thorough rinsing. The modular design also allows you to replace only worn sections, extending overall belt life.