Top Manufacturers Custom Modular Belt Conveyor Systems Packaging Industry

The actual working load depends on your material choice. According to our engineering specs at 21degree centigrade (room temperature): POM belt + PA pin offers the highest strength at 21,900 N/m. POM belt + PP pin offers a solid 16,000 N/m. PP belt + PP pin offers 14,000 N/m (best for lightweight, chemical-resistant applications). For most heavy-duty industrial accumulation tasks, we highly recommend the POM+PA combination to ensure a longer lifespan.

We offer two width configuration methods to suit various equipment: Standard Combined Assembly: The width is calculated as W = 76.2 * N (where N is any integer). For example, using two single pieces makes the width 152.4mm. Non-standard Widths: If you require a specific in-between size, we can customize it by adding a row of 25.4mm increments. The formula is W = 76.2 + 25.4 * n. Please provide your exact required internal frame width, and our team will recommend the most efficient assembly.

Standard flat belts only drive products forward, creating high friction during turns. The ZE2253 Universal Ball design acts as a built-in roller table. This allows cartons, trays, or plastic containers to move laterally, rotate, or accumulate without scratching. It is especially ideal for in-line sortation systems, packaging lines, and spiral conveyors. Furthermore, the rolling motion significantly reduces the horsepower required by your drive motor.

Our materials (POM and PP) are highly resistant to water and most common industrial cleaning chemicals. Wet/Water applications: Safe for use. However, be aware that PA (Nylon) pins absorb a small amount of moisture, which may cause slight expansion. For frequently washed lines, we recommend using PP pins to ensure dimensional stability. Food contact: While these materials are widely used in food packaging, please contact us for specific FDA or EU food-grade certificate availability.

Yes, this is a natural characteristic of injection-molded engineering plastics. The actual width will be 0.1% to 0.3% smaller than the nominal width due to material cooling and shrinkage. For example, a nominal 1000mm belt will be roughly 997mm to 999mm in actual physical size. Crucial advice for installation: Please do not calculate the belt width to fit the frame exactly. We recommend leaving a 1-2mm clearance per meter, or better yet, provide your groove dimensions to us.