Gn pan manufacturers

The most common and durable material is 304 Stainless Steel (18/8 or 18/10), which is essential for corrosion resistance and food safety. For cold storage or display, Polycarbonate (transparent) or Polypropylene (translucent) are preferred. Ensure the pans have burr-free edges and a smooth electrolytic polish to prevent bacterial growth and ensure easy cleaning.

GN Pans follow the EN 631 standard. You must verify the sizing ratio: GN 1/1 (530x325mm) is the base size. Ensure the depth (ranging from 20mm to 200mm) fits your bain-maries, chafing dishes, or blast chillers. For high-density storage, look for anti-jamming designs (tapered edges) that allow pans to be stacked and separated easily without sticking.

Since these products come into direct contact with food, you must prioritize NSF Certification or LFGB/FDA food-grade reports. If you are importing into the EU, a Declaration of Compliance (DoC) for food contact materials is mandatory. Always ask for heavy metal leaching test reports to ensure the stainless steel grade is authentic.

Perforated GN pans are specifically designed for steaming, draining, or rapid cooling, allowing steam or cold air to circulate through the holes. Standard solid pans are used for general cooking, storage, and water-bath heating. For high-end buffet setups, consider electrolytic matte or mirror finishes to enhance the aesthetic presentation.

This is a common risk in bulk sourcing. You should request a chemical composition analysis (MTR) from the supplier and hire a third-party inspector to perform a PMI (Positive Material Identification) test using an XRF gun before shipment. On Made-in-China.com, prioritize Audited Suppliers who have undergone on-site factory verifications.

GN pans are 'stackable' but heavy. To optimize costs, use LCL (Less than Container Load) for small batches or FCL (Full Container Load) for large volumes to minimize the 'dead space' in the container. Ensure the supplier uses 5-layer corrugated export cartons with corner protectors to prevent the edges of the pans from bending during transit.

Focus on the weight per piece. Some suppliers lower prices by thinning the steel (e.g., 0.6mm vs 0.8mm). Specify the thickness requirement in your contract. Negotiate a tiered pricing model where the unit price drops by 5-10% when reaching a full 20GP container volume, and ask for OEM branding (laser-etched logos) to be included for free on large orders.

Always use Secured Trading Services provided by Made-in-China.com to ensure your payment is only released after you confirm receipt and quality. Never wire 100% of the payment upfront; a standard 30% deposit and 70% balance against the Bill of Lading (B/L) is the industry norm for established cross-border trades.