Latex glove manufacturers

When sourcing latex gloves, you must prioritize material grade (medical vs. industrial) and thickness (measured in mils). For medical use, ensure a minimum thickness of 4-5 mils to prevent punctures. For industrial applications, 6-8 mils may be required. Additionally, check the tensile strength (MPa) and elongation at break (%) to ensure the gloves can withstand stretching without tearing. You should also decide between powdered and powder-free options; powder-free is now the global standard to avoid respiratory irritation and contamination.

Compliance is non-negotiable in cross-border trade. For the US market, gloves must be FDA 510(k) cleared and meet ASTM D3578 standards. For the EU market, they must carry the CE Mark and comply with EN 455 (Medical) or EN 374 (Chemical protection). If you are sourcing for food handling, ensure they meet FDA food contact regulations or EU 10/2011. Always request valid test reports from accredited third-party labs like SGS or TUV.

Latex allergy is a significant concern. You should request the AQL (Acceptable Quality Level) rating; AQL 1.5 is the standard for medical grade, while AQL 2.5 or 4.0 is acceptable for industrial use. To minimize allergy risks, ask for low-protein certification (typically less than 50 micrograms per gram). Verify if the manufacturer uses online chlorination or polymer coating, as these processes significantly reduce the extractable protein levels and improve donning ease.

The primary risks include quality inconsistency between samples and bulk orders and counterfeit certifications. To mitigate this, use Made-in-China.com's 'Secured Trading Service' to protect your payment. Always conduct a pre-shipment inspection (PSI) to verify the AQL standards and packaging integrity before the balance payment is released.

Latex prices fluctuate based on raw rubber market rates. It is wise to negotiate a price adjustment clause for long-term contracts. For MOQs, while large factories prefer 20ft or 40ft containers, you can find flexible suppliers on Made-in-China.com who allow mixed-size pallets to help you manage inventory turnover. Aim for a 30% deposit and 70% against the Bill of Lading (B/L) to balance risk.

Latex is sensitive to heat and UV light, which causes degradation (brittleness). Ensure the shipping containers are kept away from heat sources and that the warehouse environment is cool, dry, and dark. When shipping to countries with high humidity, request moisture-absorbent silica gel packets inside the inner boxes. For shipping to the US or Europe, ensure your HS Code (typically 4015.19) is correctly declared to avoid customs delays or incorrect duty applications.