Pe150x250 jaw crusher manufacturers

The PE150x250 is a small-scale primary crusher. You must verify the Feed Opening Size (150mm x 250mm), the Maximum Feed Size (≤125mm), and the Adjustable Discharge Range (10-40mm). Ensure the motor power is typically between 5.5kW to 7.5kW and the processing capacity reaches 1-3 tons per hour to meet standard efficiency benchmarks.

The most critical components are the Jaw Plates (Moving and Fixed). You should insist on High Manganese Steel (Mn13Cr2 or Mn18Cr2) to ensure wear resistance. Additionally, check that the Eccentric Shaft is made of 45# forged steel and the main frame uses heavy-duty Q235 carbon steel or cast iron with reinforced ribbing to handle high-stress loads.

For B2B procurement, the supplier must provide CE Certification for the European market or UL-listed motors for North America. Ensure the manufacturer is ISO 9001:2015 certified. Safety features must include protective belt guards, an emergency stop button, and a toggle plate designed to act as a mechanical fuse to protect the main shaft from overload.

Calculate the Total Cost of Ownership (TCO) by factoring in the low initial purchase price against the cost of wear parts. Since the PE150x250 is often used for laboratory or small mining tasks, look for suppliers on Made-in-China.com who offer bundled spare parts (extra jaw plates and toggle plates), which can reduce long-term maintenance costs by 15-20%.

Request a Pre-Shipment Inspection (PSI) or a video of a 'Dry Run' test (running the machine without load for 2-4 hours). Check for abnormal noise, excessive vibration, or overheating of the bearing housing. Using Made-in-China.com's Secured Trading services can provide an extra layer of payment protection until the quality is verified.

Focus on the Weight of the Machine; some suppliers reduce costs by thinning the frame. A standard PE150x250 should weigh approximately 0.8 to 1.0 ton. Negotiate for Export-Standard Plywood Crating to be included in the price to prevent rust and physical damage during maritime transit.

Due to the weight and density of the crusher, use FOB (Free On Board) terms if you have a reliable forwarder, or CIF (Cost, Insurance, and Freight) if you want the supplier to handle risks until the destination port. Ensure the machine is sprayed with anti-rust oil and wrapped in vacuum plastic film before being secured in a wooden case to withstand high humidity during sea freight.

Always verify the supplier's Business License and Export Qualification on the platform. Ensure the HS Code (typically 847420) is correctly declared to avoid customs delays or incorrect tariff applications. Use Letter of Credit (L/C) for large orders or Telegraphic Transfer (T/T) with a 30% deposit and 70% balance against the Bill of Lading (B/L) copy.