Salt sachet manufacturers

Salt is highly hygroscopic, meaning it absorbs moisture from the air. Therefore, the packaging must have a high moisture barrier. Common materials include PET/AL/PE (Aluminum foil laminate) or PET/VMPET/PE (Metallized film). For eco-friendly options, ensure the water vapor transmission rate (WVTR) is low enough to prevent clumping. The inner layer must be Food Grade (FDA or EC compliant) and provide a strong heat seal to prevent leakage during transport.

When sourcing pre-made sachets or roll film, you must specify the film thickness (typically 60-100 microns) and tensile strength to avoid tearing. For automated packaging, the coefficient of friction (COF) of the film is critical; it should be optimized for the supplier's machinery to ensure smooth feeding. Additionally, ensure the tearing notch (V-cut or I-cut) is precisely positioned for consumer convenience.

Suppliers must provide Food Contact Certificates such as FDA (US), REACH/LFGB (EU), or GB 4806 (China). Since salt is a food product, the manufacturing facility should ideally hold ISO 22000 or HACCP certifications to guarantee food safety management. If the salt is iodized, the packaging must be opaque to protect the iodine from degradation caused by light exposure.

Cost-efficiency is driven by volume and material thickness. Purchasing in bulk (MOQs of 100,000+ units) can reduce unit prices by up to 40%. Buyers should also consider gravure printing for large runs to achieve the lowest per-unit cost, whereas digital printing is better for small-batch market testing. Always request a Total Cost of Ownership (TCO) breakdown, including plate-making fees and shipping volume optimization.

The biggest risks are moisture damage during sea transit and non-compliance with local labeling laws. Ensure the supplier uses heavy-duty corrugated export cartons with desiccants and plastic inner liners to protect against humidity. Furthermore, verify that the ingredient list, net weight, and country of origin are printed according to the destination country's specific food labeling regulations.

Negotiate a Pre-Shipment Inspection (PSI) clause where a third party (like SGS or Intertek) verifies the seal integrity (burst test) and weight accuracy. Insist on a 1% - 2% spare quantity to cover potential machine wastage during the filling process. Use Secured Payment services on the platform to ensure funds are only released after the Bill of Lading (B/L) is confirmed.

For bulk orders, FCL (Full Container Load) is the most economical and safest method to prevent cross-contamination from other goods. If ordering roll film, ensure the pallets are fumigated (ISPM 15 standard) and the rolls are shrink-wrapped to prevent dust ingress. For urgent samples or small trial batches, Air Freight is viable, but be mindful of the high weight-to-value ratio of salt products.