trelleborg seal Manufacturers

Selecting the right elastomer is critical for performance. For oil and fuel resistance, Nitrile (NBR) is standard, while Fluorocarbon (FKM/Viton) is preferred for high-temperature and chemical exposure. For hydraulic systems requiring high wear resistance, Polyurethane (Turcon®/Zurcon®) is the industry benchmark. Always verify the operating temperature range and chemical compatibility with the specific media (fluid or gas) to prevent premature seal failure.

Buyers must confirm the Dynamic and Static pressure ratings, typically measured in Bar or PSI, to ensure the seal can withstand system surges. Hardness (Shore A) should be matched to the pressure—higher pressure usually requires harder materials (e.g., 80-90 Shore A). Additionally, check the compression set values; a lower percentage indicates better elastic recovery and a longer service life.

For food and beverage or pharmaceutical applications, seals must be FDA compliant or meet USP Class VI standards. In the automotive sector, IATF 16949 certification is essential. For general industrial use, ensure the supplier adheres to ISO 3601 for O-ring tolerances and ISO 9001 for quality management systems to guarantee batch-to-batch consistency.

Request a Material Test Report (MTR) and a Certificate of Conformity (CoC) for every batch. High-performance seals like those from Trelleborg often feature specific proprietary coatings (e.g., PTFE-based) to reduce friction; verify these via friction coefficient testing. For critical applications, utilize third-party inspections to check for surface defects like flash, burrs, or voids under magnification.

The primary risk is material substitution, where a supplier uses a cheaper elastomer that looks identical but fails under heat or pressure. To mitigate this, use Made-in-China.com's Secured Trading services and request pre-shipment samples. Another risk is shelf-life expiration; elastomers degrade over time, so ensure the cure date is clearly marked and the products are within their usable window.

Focus on Total Cost of Ownership (TCO) rather than just the unit price. Negotiate for tiered pricing based on annual volume forecasts rather than single POs. Ask for custom packaging (e.g., vacuum sealing or UV-protected bags) to be included in the price, as this prevents environmental degradation during long-distance sea freight or storage.

Seals are sensitive to UV light, ozone, and extreme temperatures. Instruct the supplier to use opaque, airtight packaging and avoid folding or crimping large-diameter seals. For international shipping, FOB (Free On Board) is recommended for better control over the logistics chain. Ensure the HS Code (typically 4016.93) is correctly declared to avoid customs delays and ensure accurate duty calculations.

Look for Audited Suppliers on the platform who have undergone on-site inspections by third-party agencies like SGS or Bureau Veritas. Review their production capacity and check if they have in-house R&D labs for rubber compounding. Prioritize suppliers who provide CAD/STEP file support for custom seal designs to ensure technical alignment before production begins.