Used glass lined reactor manufacturers

When sourcing a used glass-lined reactor, you must prioritize the integrity of the glass lining and the pressure vessel ratings. Key specs include the nominal capacity (L or m³), the design pressure for both the vessel and the jacket, and the allowable temperature range. Ensure the glass lining is a high-grade acid/alkali-resistant enamel (such as 9000 series or equivalent). Additionally, verify the agitator type (anchor, paddle, or turbine) and the motor's explosion-proof rating, especially for chemical processing environments.

The most vital step is requesting a Spark Test (High-Voltage Holiday Detection) report; a standard test uses 10kV to 20kV to identify microscopic pinholes or cracks in the enamel. You should also ask for high-resolution photos of the nozzle areas and the bottom discharge valve, as these are high-wear zones. Check for any tantalum patches, which indicate previous repairs; while acceptable in some cases, a high number of patches significantly reduces the equipment's residual value and lifespan.

The equipment must align with the destination country's pressure vessel codes. Common standards include ASME Section VIII (USA), PED 2014/68/EU (Europe), or GB150 (China). For used equipment, you must obtain the original manufacturer's data report (MDR) and a valid hydrostatic test certificate. If the reactor is intended for pharmaceutical use, ensure it meets cGMP standards and that the glass lining is FDA-compliant for food and drug contact.

Glass-lined reactors are ideal for highly corrosive processes involving strong acids (like HCl or H2SO4) where stainless steel would fail. However, they are highly sensitive to thermal shock (sudden temperature changes) and mechanical impact. Buyers must ensure their process does not involve hydrofluoric acid or concentrated phosphoric acid at high temperatures, as these chemicals will rapidly dissolve the glass lining.

The biggest risk is functional discrepancy—where the machine's actual condition does not match the seller's description. To mitigate this, always hire a third-party inspection agency (like SGS or BV) to perform an on-site audit before final payment. Another risk is import restrictions on 'waste'; some countries have strict regulations against importing used machinery that is deemed too old or inefficient. Always check the HS Code (typically 8419.89) against your local customs regulations.

Focus your negotiation on refurbishment transparency and logistics. Ask the supplier to provide a video of the agitator running to check for bearing noise or shaft wobble. Negotiate for professional export packaging, specifically heavy-duty steel cradles and vacuum-sealed moisture protection, as sea salt air can corrode the exterior carbon steel jacket during transit. Request a breakdown of the refurbishment process (e.g., new mechanical seals, fresh exterior paint, or replaced gaskets).

Use Secured Trading services provided by platforms like Made-in-China.com to ensure your funds are held in escrow until shipping documents are verified. Avoid 100% upfront payments; a standard structure is 30% deposit and 70% after the third-party inspection passes but before the ship leaves the port. Ensure the Bill of Lading (B/L) clearly describes the item as 'Used' to avoid customs valuation disputes.

Due to the fragility of the glass lining, Flat Rack containers or Open Top containers are often required for large units. The reactor must be bolted to a custom steel skid to prevent any shifting. It is critical to insure the cargo for 'All Risks' at 110% of the invoice value. Explicitly instruct the carrier that the unit cannot be stacked and must be kept away from high-vibration areas of the vessel.