Wholesale sex tools manufacturers

Safety is the most critical factor. You must ensure products are made from medical-grade silicone, non-porous TPE, or borosilicate glass. Avoid materials containing phthalates, as these are restricted in many markets (like the EU and US). Always request RoHS and REACH certification to ensure the chemical composition is safe for skin contact.

Focus on the motor quality and battery stability. High-quality products should use rechargeable lithium-ion batteries with CE or UL certification. Test for noise levels (ideally below 50dB) and ensure the waterproof rating is at least IPX7 if the product is marketed for use in the shower. Ask the supplier for the failure rate data, which should be less than 1%.

Compliance varies by region. For the US market, ensure the supplier is registered with the FDA if the products are classified as medical devices. For the European market, CE marking and WEEE (Waste Electrical and Electronic Equipment) compliance are mandatory for electronic items. Always verify that the user manuals are provided in the local language of your target market.

Request aging tests for the motors and cycle testing for the batteries. A reputable supplier should provide a warranty period of at least 1 year. For external finishes, check for colorfastness and resistance to body oils and silicone-based lubricants to prevent the material from degrading over time.

Customs regulations for adult products are strict in many countries. Ensure the HS Code (typically 901910 or 392690) is used correctly. Use discreet packaging and avoid explicit imagery on the outer shipping cartons. Work with a freight forwarder experienced in sensitive cargo to navigate regional prohibitions, especially in Middle Eastern or Southeast Asian markets.

When using Made-in-China.com, look for Audited Suppliers to ensure factory legitimacy. Negotiate based on volume-tiered pricing; for example, a 500-unit order should yield a 15-20% discount compared to the sample price. Discuss OEM/Private Labeling early, as custom molds or logo printing usually require a higher MOQ but offer better brand protection.

Never release the full payment upfront. Use a 30% deposit and 70% balance structure. Hire a third-party inspection service (like V-Trust or QIMA) to perform a Pre-Shipment Inspection (PSI). The inspector should check for functionality, hygiene, and packaging integrity. Only release the final payment once the inspection report is approved.

For small high-value batches, Air Express (DHL/FedEx) is fastest but expensive. For bulk wholesale, Sea Freight (LCL or FCL) is the most economical. Ensure the supplier provides a Material Safety Data Sheet (MSDS) and a UN38.3 Test Report for products containing lithium batteries, as these are required for both air and sea transport of 'dangerous goods'.