Cbb65a-2 capacitor

The Cbb65a-2 is a metallized polypropylene film capacitor primarily used for starting and running AC motors. You must verify the Capacitance (measured in μF) and Rated Voltage (typically 250V-450V AC) to match your equipment's requirements. Ensure the Tolerance is within ±5% for stability. Additionally, check the Dissipation Factor (tan δ); a lower value (usually ≤0.002 at 100Hz) indicates higher efficiency and less heat generation.

For global market entry, capacitors must hold UL (Underwriters Laboratories) certification for the US, CE marking for Europe, and CQC for China. Specifically, look for the UL810 standard, which ensures the capacitor has an internal explosion-proof device (pressure-sensitive disconnector). Compliance with RoHS and REACH is also essential to ensure the product is free from hazardous substances like lead or mercury.

The Cbb65a-2 typically features an aluminum cylindrical case. This design provides excellent heat dissipation and electromagnetic shielding. For outdoor units like air conditioner compressors, ensure the casing is corrosion-resistant and has a high Ingress Protection (IP) rating if exposed. The top seal should be made of flame-retardant epoxy resin or high-quality plastic to prevent oil leakage and ensure a Class P2 safety protection level.

High-quality Cbb65a-2 capacitors are rated for Class B (10,000 hours) or Class C (3,000 hours) of continuous operation. To validate quality, request Life Cycle Test reports and Salt Spray Test results for the terminals. B2B buyers should prioritize suppliers who use high-purity zinc-aluminum thickened film, which offers better self-healing properties and prevents premature failure due to voltage surges.

The primary risk is counterfeit or refurbished components that may lead to fire hazards. Another risk is capacitance decay during long-term storage in humid transit conditions. To mitigate this, use Made-in-China.com's Secured Trading services and request a Pre-shipment Inspection (PSI) to verify that the capacitance values of the actual batch match the datasheet.

Capacitor pricing is highly sensitive to the cost of polypropylene film and aluminum. For orders exceeding 5,000 units, you should negotiate a volume-based discount of 10-20%. If you are a startup, look for suppliers on Made-in-China.com that offer low MOQs (e.g., 50-100 units) for trial orders, but be prepared for a slightly higher unit price compared to container-load orders.

Capacitors are sensitive to physical impact and moisture. Ensure the supplier uses standard export packaging with anti-static bubble wrap and reinforced double-wall corrugated boxes. For sea freight, request palletization with moisture-proof shrink wrap. Ensure the HS Code (typically 853222) is correctly declared to avoid customs delays and to benefit from applicable trade agreements.

Always verify if the supplier is an Audited Supplier on Made-in-China.com, which confirms their manufacturing capabilities and business legitimacy. Use Escrow-based payment terms where funds are only released upon confirmation of receipt. Avoid direct wire transfers to private accounts; always pay to the verified corporate bank account listed on the platform.