Dry box gloves

The choice of material is critical for safety. Hypalon (CSM) is preferred for its excellent resistance to ozone and oxidizing chemicals, while Butyl offers the highest impermeability to gases and water vapor. For applications involving harsh solvents, Viton is the industry standard. Ensure the material thickness (typically 15 to 30 mil) balances tactile sensitivity with puncture resistance.

You must verify the port diameter, which commonly ranges from 6 inches to 10 inches. Additionally, confirm the cuff type (e.g., beaded or smooth) to ensure a gas-tight seal. The ambidextrous vs. hand-specific design should be chosen based on the frequency of use and the need for ergonomic comfort during long shifts.

Suppliers should provide certification for EN 374 (Chemical Protection) and EN 388 (Mechanical Risks). For pharmaceutical or semiconductor applications, ensure the gloves meet ISO 14644-1 Cleanroom Standards to prevent particulate contamination. Always request a Certificate of Analysis (CoA) for each production batch.

Unlined gloves are standard for cleanroom environments to minimize fiber shedding. However, flock-lined or jersey-lined versions provide better moisture management and comfort for operators in non-sterile industrial settings. For B2B buyers, unlined gloves are generally more versatile for high-purity chemical handling.

Rubber and polymers are sensitive to UV light and temperature fluctuations. Require the supplier to use black UV-protective inner packaging and vacuum-sealed bags. For large sea freight orders, specify below-deck storage to avoid extreme heat, and include humidity indicator cards in the cartons to monitor conditions during transit.

Utilize Made-in-China.com to identify Audited Suppliers with verified production capacities. When negotiating, request a tiered pricing structure based on annual volume rather than a single order. To ensure quality, mandate a pre-shipment inspection (PSI) where a third party tests the integrity (pressure leak test) of 5-10% of the batch.

Always use Secured Payment services provided by platforms like Made-in-China.com to ensure funds are only released upon proof of shipment. Avoid direct wire transfers to private accounts. Ensure the Proforma Invoice (PI) explicitly states the material composition and shelf-life guarantee (typically 3 years for properly stored Butyl/Hypalon).

Dry box gloves usually fall under HS Code 4015.19 (Other vulcanized rubber gloves). Check your local tariff schedule for anti-dumping duties that may apply to specific rubber products. Work with a freight forwarder experienced in PPE and laboratory equipment to ensure all Declaration of Conformity documents are attached to the airway bill or bill of lading.