Flask glass liner

Buyers should prioritize High Borosilicate Glass (3.3) due to its superior thermal shock resistance and chemical stability. Ensure the liner features a double-walled vacuum structure with a high-quality silver or aluminum coating (mirror finish) to minimize heat radiation. The glass must be lead-free and food-grade, complying with international safety standards like FDA or LFGB.

Standard performance benchmarks require the liner to maintain temperatures above 70°C for at least 12 to 24 hours when starting at 95°C. Request thermal retention test reports from the supplier. Additionally, verify the vacuum degree; a higher vacuum level between the glass walls significantly reduces heat conduction and convection.

Key inspections include the annealing process to eliminate internal stress, preventing spontaneous breakage. Check for visual defects such as bubbles, stones, or scratches in the glass, which can weaken the structure. The sealing point (tip) at the bottom must be reinforced and protected to prevent vacuum leakage, which is the most common cause of insulation failure.

For the US market, compliance with FDA 21 CFR is essential. For the EU, products must meet Regulation (EC) No 1935/2004 regarding materials intended to come into contact with food. Additionally, ensure the manufacturer adheres to ISO 9001 for quality management and ISO 45001 for occupational health and safety.

Glass liners are highly fragile. You must mandate specialized export packaging, such as individual bubble wraps, thick corrugated dividers, and reinforced outer cartons. For bulk shipments, palletization with shrink wrap is non-negotiable to prevent shifting. Always include a fragile goods clause in your shipping contract and consider CIF terms to ensure the cargo is insured against transit damage.

Focus on Total Cost of Ownership (TCO) rather than just the unit price. Negotiate for a lower defect rate allowance (e.g., less than 1%) and request spare units (usually 2-3%) to be included free of charge to cover potential transit breakage. For long-term partnerships, discuss tiered pricing based on annual volume commitments to secure the best rates.

Utilize the Secured Trading Service on Made-in-China.com to protect your payments. Never transfer full payments upfront; a standard 30% deposit and 70% balance against the Bill of Lading (B/L) after a successful third-party pre-shipment inspection is the safest practice. Verify the supplier's Audit Reports and 'Diamond Member' status on the platform to confirm their legitimacy.

Verify the HS Code (typically 7020.00 or 9617.00) to determine the exact import duties in your country. Be aware of anti-dumping duties that some regions may impose on glassware from specific origins. Ensure the supplier provides a complete documentation set, including the Certificate of Origin, Packing List, and Commercial Invoice, to avoid delays at customs.