Glass table

Safety is the paramount concern for glass furniture. You must ensure the product uses Tempered Glass (Toughened Glass), which is 4-5 times stronger than standard glass. For the US market, look for ANSI Z97.1 certification; for the EU, EN 12150-1 is mandatory. Always verify that the glass has polished edges (c-shaped or beveled) to prevent injury and that the fragmentation test results show the glass breaks into small, blunt pieces rather than sharp shards.

The thickness should align with the table's function and support structure. For coffee tables with a full frame, 6mm to 8mm is sufficient. For dining tables or desks where the glass is the primary surface, a minimum of 10mm to 12mm is recommended. For heavy-duty executive desks or frameless designs, consider 15mm to 19mm to ensure structural integrity and a premium aesthetic.

Ensure the frame is made of corrosion-resistant materials like 304 Stainless Steel or powder-coated aluminum. The connection between the glass and the frame should utilize UV-cured adhesive for a seamless look or high-quality suction pads/silicone gaskets to prevent slippage. If the design involves metal disks (bosses) glued to the glass, verify the tensile strength of the bond to prevent detachment during transit or use.

Beyond clear glass, B2B buyers are increasingly sourcing Ceramic-Laminated Glass, which combines the scratch resistance of ceramic with the strength of glass. Digital printing technology allows for marble or wood grain patterns directly on the glass. Additionally, Anti-fingerprint (acid-etched) glass is highly sought after for high-end office environments to maintain a clean appearance with minimal maintenance.

Glass is a high-risk category for damage. You must mandate 5-layer corrugated cardboard packaging with high-density expandable polystyrene (EPS) or EPE foam protecting all corners. For LCL (Less than Container Load) shipments, require wooden crates or plywood pallets to prevent crushing. Always include a 'Fragile' and 'Handle with Care' label in multiple languages and consider placing Impact Indicator stickers on the outer carton to monitor rough handling.

Focus on Quality Consistency rather than just the lowest price. Request a pre-shipment inspection (PSI) by a third party like SGS or Intertek. Negotiate a defect rate allowance (typically below 1-2%) and agree on a compensation clause where the supplier replaces broken panels in the next shipment or provides a refund. For bulk orders, ask for a 5-10% discount on the unit price if you increase the volume to a full container load (FCL), which also reduces handling damage.

Use Secured Payment services provided by Made-in-China.com to ensure your funds are only released after you confirm receipt and inspection. Never wire full payments to personal bank accounts. A standard professional payment term is 30% deposit and 70% against the Bill of Lading (B/L) copy after the goods have passed the quality check.

Verify the HS Code (typically 9403.89 for other furniture or 7013.37 for glassware) to determine the exact tariff rate in your country. Be aware of Anti-Dumping Duties that some regions (like the EU or USA) may apply to specific glass products from certain origins. Ensure the supplier provides a Certificate of Origin (CO) to potentially benefit from preferential trade agreements.