Hardox plate 400

Hardox 400 is an abrasion-resistant (AR) steel with a nominal hardness of 400 HBW. It combines high wear resistance with good cold bending and welding properties. Key specifications include a yield strength of approximately 1000 MPa and high impact toughness even at low temperatures. When sourcing, ensure the chemical composition strictly adheres to low carbon equivalent (CEV) levels to facilitate easy welding without extensive preheating.

Authentic Hardox plates are manufactured by SSAB, but many suppliers provide equivalent wear-resistant grades. To ensure quality, always request a Mill Test Certificate (MTC) according to EN 10204 3.1. Verify the Brinell hardness testing reports and check for the unique heat number stamped on the plate. For B2B buyers on Made-in-China.com, look for 'Audited Suppliers' who can provide third-party inspection reports from agencies like SGS or BV.

Hardox 400 is widely used in crushers, sieves, feeders, and buckets for mining and construction. Regarding processing, it is essential to use low-hydrogen welding consumables to prevent cold cracking. For cutting, laser or waterjet cutting is preferred to minimize the Heat Affected Zone (HAZ), which can soften the edges and reduce wear resistance. If using plasma or oxy-fuel, ensure proper cooling or grinding of the edges.

While Hardox is a brand name, the material should meet international standards for high-strength wear-resistant steel such as ASTM A514 or ISO 15614 for welding procedures. Ensure the supplier complies with ISO 9001:2015 for quality management. For shipments to the EU, verify REACH and RoHS compliance if the plates are part of a larger machinery assembly.

The most significant risk is material substitution, where lower-grade AR steel is sold as genuine Hardox. Another risk is surface oxidation and pitting caused by improper sea freight packaging. To mitigate this, use Trade Assurance services on Made-in-China.com and insist on seaworthy packaging including waterproof paper and steel strapping.

Steel prices are highly volatile and linked to global iron ore indices. Negotiate based on theoretical weight vs. actual weight to avoid overpaying. For MOQs, many suppliers require 5-10 tons for custom sizes, but you can find 'Stockists' on Made-in-China.com who offer 1-unit (single plate) MOQs for standard dimensions (e.g., 1500x6000mm).

Due to the high weight-to-volume ratio, 20ft containers are preferred over 40ft to stay within weight limits (typically 25-28 tons max). Ensure the supplier provides fumigated wooden pallets or steel skids. For shipping to specific regions, clarify the Incoterms (FOB vs. CIF); for heavy industrial goods, CFR or CIF is often more convenient for buyers, but FOB allows better control over local port charges.

Always conduct transactions through secure payment gateways that offer escrow-like protection. Avoid direct wire transfers to private accounts. Utilize the Audit Report feature on Made-in-China.com to check the supplier's factory capacity, registered capital, and export history before releasing large down payments (typically 30% deposit, 70% against B/L copy).