Pvc+board

When selecting PVC boards, the most critical factor is density, typically ranging from 0.4g/cm³ to 0.9g/cm³. For construction and furniture, a higher density (≥0.55g/cm³) is required for screw-holding power and structural integrity. For advertising and signage, lower density boards are more cost-effective and lightweight. Additionally, verify the surface hardness (Shore D) to ensure scratch resistance and check for UV stabilizers if the product is intended for outdoor use to prevent yellowing and brittleness.

Buyers must ensure products meet REACH and RoHS standards to guarantee the absence of heavy metals like lead or cadmium, especially for the EU market. For construction applications, fire retardancy certifications such as UL94 V-0 or EN 13501-1 (Class B) are essential. If the boards are used for interior decoration, request Formaldehyde-free certification (E0 grade) to meet environmental health regulations.

Celuka boards have a smooth, hard outer skin and are ideal for furniture and cabinetry due to their durability. Free Foam boards have a consistent matte texture throughout and are best for printing and temporary displays. Co-extruded boards feature a very high-gloss, rigid surface on both sides with a foam core, offering the highest impact resistance and aesthetic finish for premium wall panels.

The main risks are corner damage and surface warping due to heat or improper stacking. Ensure the supplier uses thick protective PE film on both sides and reinforces pallet corners with hardboard protectors. For full container loads (FCL), request desiccants to prevent moisture buildup, and ensure the boards are laid perfectly flat to avoid permanent deformation during long-transit sea voyages.

Pricing for PVC boards is highly sensitive to raw material (PVC resin) market fluctuations. It is advisable to negotiate a formula-based pricing for long-term contracts. On Made-in-China.com, many top-tier suppliers offer flexible MOQs (e.g., 50-100 pieces) for standard white boards, but custom colors or sizes usually require a full container load (20GP) to optimize production efficiency and shipping costs.

Always utilize Secured Trading Services provided by platforms like Made-in-China.com to protect your payment until shipping documents are verified. For first-time orders, insist on a Third-Party Pre-shipment Inspection (PSI) to verify the thickness tolerance (usually ±0.2mm) and weight per sheet, as these are common areas where low-quality suppliers may cut corners to reduce costs.