What is the electrical interface type?

The electrical interface is a 3.5 mm mono phone jack.

Honeywell Oxygen Sensor OOA101-1 E01-00-0031

Name: Honeywell Oxygen Sensor OOA101-1 E01-00-0031
Brand: BNSENS Co., Ltd.
SKU: 2277099735

Jiangsu, ChinaBNSENS Co., Ltd.

US$1.00-699.00

1 Piece

Sample price:US$50.00/piece.Request sample

Product profile

Customization

Available

Type

Oxygen Sensor

Conductivity Type

Electrochemical gas sensor

Model NO.

E01-00-0031

Material

Metal

Sensitivity

High

Customized

Non-Customized

Measurement Range

0-100% oxygen

Nominal sensor lifetime

> 1,000,000 % volume oxygen hours

Output in ambient air

7 mV ... 13 mV

Electrical interface

3,5 mm mono phone jack

Linearity error

< 3 % relative

Response time

< 5 s to 90 % of final value

Zero offset voltage

< 40 μV in 100 % nitrogen

Cross interference

< 0.1 % oxygen response to: 16 % CO2 balance N2

Influence of humidity

-0.03 % rel. per %RH at 25°C

Pressure range

0.6 bar ... 2 bar (ppO2 0 ... 1250 mbar O2 )

Operating temperature

0°C ... 50°C

Operating humidity

0 % ... 99 %RH non-condensing

Part number

E01-00-0031

Transport Package

Carton

Specification

approximately 28 grams

Trademark

Honeywell

Origin

China

Key features

High Precision & Stability: Electrochemical sensor with excellent signal stability and high selectivity against CO2.

Fast Response Time: Response time is less than 5 seconds to reach 90% of the final value.

Long Service Life: Nominal sensor lifetime exceeds 1,000,000 volume oxygen hours.

Certified Quality: Manufactured in Germany with certified quality management systems.

Low Cross Interference: Cross interference is less than 0.1% for common gases like CO2 and CO.

Wide Operating Range: Operates in 0-100% oxygen concentration and 0-99% RH humidity.

Technical Support: Provides ongoing technical support and engineering analysis for integration.

Standard Interface: Features a standard 3.5 mm mono phone jack for easy electrical connection.

Company profile

Importers and ExportersFast DeliveryQuality Assurance100% Finished Products Inspection

BNSENS Co., Ltd.

Jiangsu, China

Business Type: Manufacturer/FactoryAverage Response Time: ≤2.60h

AI-Powered supplier vetting

SummaryBNSENS Co., Ltd. is identified as a Chinese manufacturer/factory in Jiangsu specializing in sensors and transmitters for pressure, level, temperature, flow, current, switching, and position applications. The supplier describes MEMS and independently developed ASIC expertise, a U.S.-based R&D center, and supply or cooperation relationships involving Emerson, SICK, TSMC, Siemens, Infineon, and Rohm. Its products are reported as serving multiple industrial sectors, and an audit was conducted by BV; however, the audit result and type are provided only as codes, so certification or compliance conclusions cannot be made. Information on after-sales service, financial credibility, quality systems, customization, sustainability, and several R&D services is insufficient. The stated registered capital is omitted from this assessment for privacy.

Supplier typeThe supplier is explicitly identified as a Manufacturer/Factory and a high-tech enterprise specializing in sensor development, manufacturing, and trade. Its stated business scope is Electrical & Electronics, and its listed products cover multiple sensor and transmitter categories.

R&D capabilityBNSENS describes a sensor R&D center in Minnesota, core MEMS-chip technology, independently developed ASIC chips, German-origin production-line introduction, and development of additional industrial-control sensors. These statements provide explicit evidence of R&D and technology activity, although the scope and verification of the capabilities are not further documented.

Production capacityThe supplier is classified as a factory and states that it develops and manufactures a broad range of sensor products. Its history includes a sensor production-line introduction and factory relocation, while reported use across oil, gas, power, chemical, metallurgy, food, environmental protection, aerospace, and municipal applications supports production experience; actual capacity, equipment scale, and output data are not provided.

Client casesThe supplier reports that its products are used across numerous industries and cites relationships or sales involving Emerson, SICK, TSMC, Siemens in Vietnam, Infineon, and Rohm. These are explicit customer or business-cooperation claims, but the slices do not provide project details, order scope, duration, or independently verified case evidence.

Product Q&A

Q:What is the measurement range of this oxygen sensor?

The measurement range is 0% to 100% oxygen at atmospheric pressure.

Q:How long is the nominal sensor lifetime?

The nominal sensor lifetime is greater than 1,000,000 volume oxygen hours.

Q:What is the response time of the sensor?

The response time is less than 5 seconds to 90% of the final value.

Q:Is this sensor customizable?

No, this specific product (OOA101-1) is listed as Non-Customized.

Q:What is the warranty policy for this product?

Honeywell warrants goods against defective materials and faulty workmanship during the applicable warranty period, offering repair or replacement at its option.