Enclosed Platform Laser Welding Machine with Rotary Table for Metal Parts

Any part where the weld follows a circular or cylindrical path-flanges, pipe caps, bearing housings, shaft collars, seal rings, filter bodies, and tube-to-flange assemblies. The rotary table provides consistent, controlled rotation that produces a continuous, unbroken weld bead around the full circumference.

The control system synchronizes the rotary speed with the laser power and pulse settings. You program the desired rotation speed (typically in degrees per second or RPM), and the laser parameters are timed to match. This ensures consistent energy input per unit length of weld around the entire circumference, regardless of the part diameter.

Yes, depending on the configuration. The combined fixed-plus-rotary option provides a standard flat work surface alongside the rotary table on the same platform. For shops that weld both circular and non-circular parts, this avoids dedicating an entire machine to rotary-only work.

The rotary table is customizable based on your typical workpiece dimensions. Standard configurations handle parts from approximately 20mm to 500mm in diameter, with heavier-duty options available for larger, weightier circular components. We recommend sending your part specifications for a specific capacity recommendation.

The speed is programmable and held constant during each weld cycle for uniformity, but it can be set to different values for different parts or weld passes. The machine can adjust and save parameters based on the part, and operators can fine-tune settings at any time through the HMI.