Synthetic Athletic Running Track Surface for Sports Facilities Plastic Runway Flooring Track

Excellent question. A hybrid track features a dual-layer system: Base layer (9-10mm): Porous rubber granules bound with PU adhesive,allows vapor release and prevents blistering. Top layer (3-4mm): PU-blended EPDM fine granules,cast as a dense, high-elasticity surface with superior strength.

Compared to breathable tracks, our hybrid offers double the abrasion resistance and superior athletic performance because the dense PU blended top layer doesn't lose granules over time. Compared to composite tracks, our hybrid features a PU cast top layer (not just compressed EPDM), which provides tighter surface density, better elasticity, and longer lifespan, closing the performance gap to full-solid systems.

Yes. When installed on a proper sub-base, our 13mm hybrid track meets World Athletics (IAAF) performance requirements;It is suitable for official competitions, professional training, and educational institutions.

We recommend a stable asphalt or concrete base with a thickness of at least 80-100mm, properly compacted and cured. The base should have a slight slope (0.5%-1%) for drainage and must be clean, dry (moisture content <5%), and free from oil, dust, or loose particles.

Ideal installation conditions are 5 to 35 degrees with relative humidity below 80%. Avoid installation during rain, heavy fog, or strong winds.Base layer curing: 12-24 hours;Top layer (PU-blended) curing: 24 to 48 hours (PU requires slightly longer than standard EPDM) Full use: The track can be fully opened after 7 days of proper curing.For cold climates below 5degrees, we recommend using winter-grade PU adhesive to extend the working time.