10 X 12.5 X 7.5 mm Stripline Ferrite RF Circulator, -40 to +70 C

This offering is a stripline ferrite RF circulator for non-reciprocal RF signal circulation. It covers three separately listed frequency configurations: 12.0-18.0G, 18.0-23.0G, and 23.0-25.0G. These options are not presented as one continuous 12.0-25.0G operating range. Across the configurations, the listed housing size is 10 x 12.5 x 7.5 mm and the temperature range is -40 to +70 C.

Three electrical configuration options are listed in the same 10 x 12.5 x 7.5 mm format. The 12.0-18.0G option has 500M bandwidth, while the 18.0-23.0G and 23.0-25.0G options each have 1000M bandwidth. No separate accessories or delivery contents are stated in the supplied information. The current configuration record also leaves connector type and average power unstated.

The 12.0-18.0G configuration lists 0.5 dB insertion loss, 20 dB isolation, and 1.25 VSWR. The 18.0-23.0G configuration lists 0.6 dB insertion loss, 18 dB isolation, and 1.3 VSWR. For 23.0-25.0G, the listed values are 0.6 dB insertion loss, 15 dB isolation, and 1.4 VSWR. The bandwidth, insertion loss, isolation, and VSWR values must be evaluated as the parameter set for the selected frequency configuration.

The current configuration is identified as a stripline ferrite RF component with dimensions of 10 x 12.5 x 7.5 mm, expressed as length x width x height. Its stated environmental temperature range is -40 to +70 C. The connector type is not stated in the current configuration record. Therefore, a specific mating interface or connector compatibility should not be assumed without confirmation.

Specify the required frequency configuration when making an inquiry: 12.0-18.0G, 18.0-23.0G, or 23.0-25.0G. The selected range determines the associated bandwidth and the listed insertion loss, isolation, and VSWR values. Confirm that the 10 x 12.5 x 7.5 mm dimensions and -40 to +70 C temperature range fit the intended installation. Connector type and average-power requirements should also be clarified because they are not stated for the current configuration record.