12.65 mm PTFE Jacketed Spring Armored RF Cable with Tinned Wire Shield

This offering is an RF cable with spring armor for cable tensile and torsional protection. Its documented construction combines a right-hand stainless steel wire spring, a tinned-wire inner shield, a PTFE middle layer, and a PTFE outer jacket. The spring free pitch is 2.00 mm, and the inner shield coverage is specified as at least 90%

The supplied information documents one spring-armored RF cable construction with stainless steel wire spring armor, tinned-wire shielding, and PTFE middle and outer layers. The outer jacket colour is listed as Purple-Black or Custom. No connector, termination, accessory, cut length, or separate delivery content is specified in the available product information

The specified operating temperature range is -40 to +165 deg C. The minimum installation bending radius is 62.5 mm, while the repeated-flexing bending radius is 125 mm, making the repeated-flexing value larger than the installation value. Water and oil resistance is listed as No, and no electrical performance values such as frequency, attenuation, impedance, or voltage are provided

No connector type, termination style, pinout, or system-interface compatibility is specified for this RF cable. The spring nominal ID is 8.50+/-0.10 mm and its nominal OD is 10.90+/-0.10 mm, while the outer jacket nominal OD is 12.65+/-0.15 mm. These dimensions describe the cable structure and do not confirm compatibility with a particular connector or equipment interface

For selection, compare the cable route with the 62.5 mm minimum installation bending radius and the 125 mm repeated-flexing bending radius. Confirm that the intended operating temperature remains within -40 to +165 deg C, and note that water and oil resistance is listed as No. Confirm the required jacket colour, as Purple-Black or Custom is listed.