5.00 mm PTFE RF Cable with Stainless Steel Spring and Silver-Plated Copper Shield

This listing is for an RF cable with a PTFE outer jacket and a stainless steel, right-hand spring. The listed layered construction also includes a silver-plated copper-wire inner shield with at least 90% coverage and a PTFE waterproof-tape middle layer. The nominal outer-jacket diameter is 5.00 +/- 0.10 mm. Cable length, connectors, terminated assemblies, and end-interface types are not specified in the available table

The specified outer jacket is PTFE and is listed in purple-black or custom color. Its nominal OD is 5.00 +/- 0.10 mm, while the PTFE waterproof-tape middle layer has a nominal OD of 4.50 +/- 0.10 mm. The construction further includes a stainless steel spring and silver-plated copper-wire inner shield. Separate cable lengths, connectors, terminations, packaging, and accessories are not stated and should be confirmed for an order

The inner shield is made of silver-plated copper wire and has stated coverage of at least 90%, with a nominal OD of 4.22 +/- 0.10 mm. The cable has a stated operating temperature range of -40 to +165 C. Its stainless steel spring has a 0.50 mm free pitch. Electrical values such as impedance, frequency range, attenuation, and power handling are not provided in the available information

The cable uses a right-hand stainless steel wire spring with a nominal ID of 3.00 +/- 0.05 mm and nominal OD of 3.80 +/- 0.05 mm. The minimum installation bending radius is 26 mm, while the repeated-flexing bending radius is 52 mm. The outer jacket is PTFE, and the operating temperature range is -40 to +165 C. Connector compatibility is not specified, and water/oil resistance is listed as no

Buyers should identify whether purple-black or custom jacket color is required. The intended bending condition should be specified because the installation bending radius is 26 mm and the repeated-flexing bending radius is 52 mm. The operating environment should be assessed against the stated -40 to +165 C temperature range and the listed absence of water/oil resistance.