Working gloves manufacturers

Depending on your target market, you must ensure compliance with specific standards. For the EU market, gloves must carry the CE mark and comply with EN 388 (mechanical risks like abrasion, cut, tear, and puncture) and EN ISO 21420. For the US market, look for ANSI/ISEA 105 ratings. If the gloves are for chemical protection, EN ISO 374 is mandatory. Always request valid test reports from accredited third-party labs to verify these ratings before finalizing a purchase.

Material selection is critical for performance. Nitrile-coated gloves are ideal for handling oily parts and offer excellent puncture resistance. Latex coatings provide superior grip for construction and glass handling but should be avoided if latex allergies are a concern. For heavy-duty tasks, synthetic leather or cowhide offers durability, while HPPE (High-Performance Polyethylene) or stainless steel mesh is required for high-level cut protection in food processing or metal fabrication.

Pay attention to the gauge (knitting density); a 13-gauge or 15-gauge liner offers a balance of dexterity and protection, while an 18-gauge liner provides maximum tactile sensitivity. Check the dipping technique (palm-dipped, 3/4 dipped, or fully dipped) to ensure it matches the required liquid protection. Additionally, ensure the cuff design (elasticated vs. safety cuff) prevents debris from entering the glove while maintaining a secure fit.

Implement a strict AQL (Acceptable Quality Limit) inspection standard, typically Level II 2.5/4.0. Key checkpoints include coating consistency (no bubbles or peeling), seam strength, and size uniformity. For coated gloves, perform a flex test to ensure the coating doesn't crack. It is highly recommended to source from suppliers on Made-in-China.com who offer factory audits and pre-shipment inspections.

The primary risks include material substitution (using lower-grade polymers to reduce costs) and non-compliant labeling. Ensure your contract specifies the exact chemical composition of coatings and the required safety markings. Another risk is fluctuating raw material prices (like nitrile or latex); consider long-term price hedging agreements or volume-based contracts to stabilize your supply chain costs.

Focus on Total Cost of Ownership (TCO) rather than just the unit price. Negotiate for lower MOQs on trial orders to test market response, and request tiered pricing where the unit cost drops as volume increases. For established relationships, aim for 30% deposit and 70% balance against the Bill of Lading (B/L). Utilizing the Secured Trading services on Made-in-China.com can provide an extra layer of payment security.

Working gloves are relatively high-volume but low-weight compared to machinery. For large orders, FCL (Full Container Load) sea freight is the most cost-effective. If you are a small-to-medium enterprise, LCL (Less than Container Load) is viable. Ensure the supplier uses moisture-proof packaging and desiccants, as humidity during sea transit can cause mold on leather gloves or degradation of certain rubber coatings.

Stay informed about Anti-Dumping Duties (ADD) and specific tariffs (e.g., Section 301 tariffs in the US) that may apply to Chinese-made rubber or plastic products. Verify the HS Code (typically 6116 or 6216) with your customs broker to calculate accurate duties. Choosing a supplier on Made-in-China.com who is familiar with Certificate of Origin (CO) requirements can help you leverage trade agreements and reduce import taxes.