MP E24h03 Cellulose Ether for Hand and Machine Plaster

MP E24H03 is economical hydroxypropyl methylcellulose cellulose ether for gypsum plaster dry mix mortar systems.

It provides fast thickening effect and reliable water retention performance to raise plaster construction efficiency and lower application cost.

It fits both hand applied plaster and machine sprayed plaster and targets various gypsum based plaster mortar scenarios.

It owns medium strong thickening efficiency medium strong sag resistance medium wetting property medium heat stability and medium water demand.

Appearance is fine white powder without surface treatment. Viscosity reaches 40000 to 50000cps tested by Brookfield RVT under two percent solution. Moisture content is controlled within 8.0 percent.

Recommended dosage ranges from 0.25 percent to 0.50 percent of cementitious material weight. Pre test must be conducted according to raw material status and construction specifications before formal u

Better mortar surface finish can be achieved when compound used with redispersible polymer powder or polyvinyl alcohol inside plaster formulation.

It keeps good compatibility with all Portland cements and gypsum based products. It matches full Sidleychem admixture series and requires separate feeding to mixing system.

Packed in 25 kilogram or 55 pound paper bags. Store inside original sealed package in dry clean environment away from heat sources.

It is non hazardous and not classified as dangerous goods during transportation. Complete safety operation instructions can be checked in corresponding HPMC MSDS document.