19 GHz 50 Ohm Semi-Rigid Coaxial Silvered Copper RF Cable with PTFE Dielectric

This offering is a semi-rigid RF cable for RF and electrical interconnection. Its specified construction includes a silvered copper clad steel inner conductor, PTFE dielectric, and ternary-alloy-plated seamless annealed bare copper-tube outer conductor. The cable has 50 Ohm impedance and a maximum operating frequency of 19 GHz. The supplied data does not identify a specific end-use application or a pre-installed assembly

The supplied listing data identifies the semi-rigid cable and its dimensional, material, electrical, and environmental parameters. It specifies a 1.65 mm inner-conductor O.D., 5.31 mm dielectric O.D., and 6.35 mm outer-conductor O.D. Connector types, cut lengths, terminated cable assemblies, packaging, and accessories are not stated. Buyers should confirm any such deliverables separately when submitting an inquiry

The cable is specified for operation up to 19 GHz, with 50 Ohm impedance, 95 pF/m capacitance, and 70% velocity. Typical attenuation is listed at 25 deg C and sea level, from 0.13 dB/m at 400 MHz to 1.33 dB/m at 18000 MHz. Electrical ratings include 3000 Vrms at 60 Hz working voltage and 7500 Vrms at 60 Hz voltage withstanding. These published values should be compared with the buyer's required operating conditions

The structure consists of a silvered copper clad steel inner conductor, PTFE dielectric, and plated seamless annealed bare copper-tube outer conductor. The stated bend radius is 22.2 mm, while cable weight is 160 g/m. Its listed temperature range is -55 to +125 deg C, and the outer conductor has a withstanding temperature of 150 deg C. No mating connector interface or equipment compatibility is identified in the supplied data

For selection or quotation, provide the required cable length, operating frequency, and any connector or termination requirements. The requested electrical conditions should be checked against the listed 50 Ohm impedance, 3000 Vrms working voltage, and 19 GHz maximum operating frequency. Installation planning should consider the 22.2 mm bend radius and the -55 to +125 deg C temperature range. Confirm requirements not explicitly stated in the product data before ordering