DC to 40 GHz High Frequency High Isolation Low Loss Reflective Sp2t Connectorized Electromechanical RF Switch

This listing covers a reflective single-pole 2-throw electromechanical RF switch. The locked source specifies operation from DC to 40 GHz with 50 ohm port impedance. The current configuration uses 2.92 mm female RF ports and is described separately from every other catalog model. Its topology and RF path behavior come directly from the product-type row.

The current configuration provides 2.92 mm female RF interfaces and a terminal-post control interface. The source specifies TTL control, with 0 V as logic 0 and 3.3 to 5 V as logic 1 and a +12 V DC with current no more than 200 mA supply. The catalog also records a weight of 70 g, while external dimensions are retained in source Figure 5-1 with millimeter units.

The first listed band specifies isolation of at least 80 dB@DC to 12 GHz, insertion loss of no more than 0.2 dB@DC to 6 GHz, and port VSWR of no more than 1.2@DC to 6 GHz. The first listed average-power limit is no more than 45 W@DC to 6 GHz. Switching time is no more than 15 ms, and switching life is at least 2 million operations. Every limit applies only to its stated frequency band and should not be extrapolated.

The specified operating range is -45 deg C to +65 deg C, and the storage range is -55 deg C to +85 deg C. RF connection uses 2.92 mm female ports, while control is through the terminal-post interface. The source defines TTL control, with 0 V as logic 0 and 3.3 to 5 V as logic 1 and a +12 V DC with current no more than 200 mA supply. External dimensions are controlled by the retained Figure 5-1 drawing.